Fire Fighting Pump PH-DELTA

Fire Fighting Pump PH-DELTA

This new lightweight (only 70 kg with full tanks) fire fighting pump is equipped with a Briggs & Stratton Vanguard 18 HP V-Twin 4-stroke
engine with an integrated 8 litre fuel tank. The engine is covered by 3-year warranty. Due to its low weight and compact design, the PHDELTA
fire fighting pump can be very easily transferred by only two firefighters to the vicinity of fire, even in narrow and uneven terrain. The
pump inlet is 2,5” with a strainer and 1x outlet 2,5” equipped with a ball valve. The Delta pump is equipped with an anti-vibration frame and
hinged handles.

Detailed description Fire fighting pump PH-DELTA

Due to its low weight and compact design the PH-DELTA fire fighting pump can be very easily transferred by only two firefighters to the vicinity of fire, even in narrow and uneven areas.

Benefits of the PH-DELTA petrol-engine driven pump:

  • Professional, two-cylinder, air-cooled, four-stroke OHV petrol engine with automatic mechanical speed control, powerful  pump chamber
  • Fixed mounted motor-pump assembly in one construction unit
  • Anti-vibration mounting of the unit
  • Robust, ergonomically designed tubular frame
  • Manual start (recoil starter)
  • Conventional fuel
  • Allows long-term full load
  • Speed control
  • Gas vacuum pump
  • Pressure gauge at the outlet from the chamber
  • Ball valve at discharge
  • Ceramic mechanical seal
  • Service support
  • Bronze impeller

Warning: The pump must not be run in enclosed areas as there is a danger of carbon oxide poisoning!!!

Device description and configuration:

                            Basic configuration:
Engine: Briggs & Stratton Vanguard 18HP
Pump casing: high-strength aluminium alloy (hydronal)
Pump cover: high-strength aluminium alloy (hydronal)
Impeller: bronze
Frame: welded steel

The pump is fixed to the motor to form one unit. Therefore, it cannot be used separately. The motor shaft passes through the pump casing equipped with a seal. The pump housing has a cover with a suction port and discharge port with a ball valve.

Never operate the pump without water as this may cause overheating leading to damage to the pump.

Roll bar frame is welded from steel tubes coated with paint finish. The device is provided with hinged handles for handling of the pump. The Vanguard 18HP engine is manufactured in the highest quality of Briggs & Stratton engines.

The data was measured by the accredited testing laboratory TÚPO No. 1011-2


Max. flow 1 703 l/min
Flow at 0,5 MPa 774 l/min
Flow at 0,6 MPa 577 l/min
Total head 76,5 m
Max. suction depth 8 m
Suction connection Storz B75 (2,5")
Discharge connection Storz B75 (2,5")
Engine Briggs & Stratton
Engine power 13,4 kW / 18 HP
Integrated fuel tank capacity 8 l
Fuel Unleaded petrol (BA95)
Device dimensions (L x W x H) 600 x 570 x 595 mm
Dry weight (empty) 62,2 kg
Weight (with full tanks) 70 kg


Fotka 1

Fotka 2

Fotka 3

Product enquiries

Items marked with an asterisk (*) are compulsory.

Contact data

Tel.: +420 466 985 890
  +420 466 985 891
  +420 466 985 892
Fax: +420 466 985 367
GSM: +420 602 661 103

Hot-line: 800 150 112

More contacts

© 2018 Pavliš a Hartmann spol. s r.o.

Prohlášení o přístupnosti | Podmínky užití | Ochrana osobních údajů | Sitemap

Created by eBRÁNA s.r.o. | Powered by WebArchitect | SEO a internetový marketing

to top ↑