Floating pump PH-Cyklon 2/1500

Floating pump PH-Cyklon 2/1500

The device is designed for fire brigades to replenish fire engine tanks with water from outdoor natural water sources, to pump out water from flooded areas, etc. Sufficient power of the pump allows it to supply water simultaneously to two nozzles of type C and one of type B. (Storz C – Ø 52mm, Storz B – Ø 75mm)

The device can be used by fire brigades to replenish fire engine tanks with water from outdoor natural water sources. It can also be used to pump out water from flooded areas and rooms and for other applications, e.g. agriculture, building sites, etc.

Sufficient power of the pump allows it to supply water simultaneously to two nozzles of type C and one of type B. (Storz C – Ø 52mm, Storz B – Ø 75mm)

Warning: The pump must not be run in enclosed areas as there is a danger of carbon oxide poisoning!!!

Complete device

Engine: HONDA GXV 390
Pump Casing: centrifugal type-Al casting
Float: Polyethylene/polyurethan
Supporting plate: Al Mg5 Si1 Mn
Runner: Al Mg5 Si1 Mn
Suction cover: Al Mg5 Si1 Mn

Main specifications:

Max. flow 1 540 l/min
Total head 55 m
Discharge connection Storz B75 (2,5”)
Engine Honda GXV 390
Engine power 7.6 kW / 10.2 HP / 13HP (SAEJ1995)
Fuel tank capacity 2.1 l
Fuel unleaded petrol (BA 95)
Float dimensions (L x W x H) 980 x 710 x 200 mm
Device dimensions (L x W x H) 1030 x 730 x 500 mm
Dry weight (empty) 53 kg
Cat. number vv 228

The data was measured by the accredited testing laboratory TÚPO No. 1011-2

The pump and the engine are in one unit, so the pump cannot be used independently. The engine shaft goes thru the pump block without a sealing. The pump block is bolted to the engine thru the supporting plate and the pump cannot be connected to any other engine type. The bottom side of the block is fitted with a cover to prevent debris and particles over Ø 20mm. The delivery outlet is fitted with a B75 hose coupling.

The float body is made of polyethylene by centrifugal injection as one block. The internal wall has about 20 mm of lightweight polyurethane foam in order to increase resistance to breakthrough which guarantees unsinkability of the device. This design of the float features outstanding stability on the water surface.The frame is used both for carrying and handling the unit and also for fixing a rope to secure it in its position. The design of the pump allows „dry“ run without damage.

Photogallery

Floating pump PH-Cyklon 2/1500

Floating pump PH-Cyklon 2/1500

Floating pump PH-Cyklon 2/1500

Floating pump PH-Cyklon 2/1500

Floating pump PH-Cyklon 2/1500

Product enquiries

Items marked with an asterisk (*) are compulsory.



Contact data

Tel.: +420 466 985 890
  +420 466 985 891
  +420 466 985 892
Fax: +420 466 985 367
GSM: +420 602 661 103

Hot-line: 800 150 112

More contacts

© 2018 Pavliš a Hartmann spol. s r.o.

Prohlášení o přístupnosti | Podmínky užití | Ochrana osobních údajů | Sitemap

Created by eBRÁNA s.r.o. | Powered by WebArchitect | SEO a internetový marketing

to top ↑