Heavy foam inducing adaptor for the Tajfun - Profi C nozzle

Heavy foam inducing adaptor for the Tajfun - Profi C nozzle

Product enquiries

If you have questions about this product feel free to contact us:

Phone: +420 466 985 890

E-mail: office@phhp.cz


Foam inducing adaptor for the Tajfun- Profi C 52 nozzle consists of a 150 mm diameter stainless steel body with a screen inside and a holder to fix it to the revolving nozzle head.
The adaptor is 435 mm long and weighs 1650 g. The flow through the adaptor is given by adjusting the nozzle flow. Optimum situation for foam inducing is the flow rate of 255 l/min at 0.4 Mpa with the nozzle revolving head set to the angle about 33°, (i.e. the turbo mode - when the toothed ring starts rotating).

Cat. No. vv 156

Product enquiries

Your first name and surname: *
Your e-mail address: *
Your enquiry/message: *
 
 
Control code: *

Fields marked as (*) are mandatory.

After clicking on "Send" the message will be sent to our e-mail. You can expect our response within 2 working days. But mostly it will take only a few hours.

EmailSend to e-mail PrintPrint

Our products

Recommended

Are you not sure?

Tel.: +420 466 985 890
+420 466 985 981
+420 466 985 892
Fax: +420 466 985 367
GSM: +420 602 661 103
E-mail: office@phhp.cz

Opening hours:

Monday - Friday       7.00AM - 3.30PM
Site map Optimalizace pro vyhledávače eBRÁNA s.r.o. Tvorba www stránek eBRÁNA s.r.o.

Bezpečnostní agentury | Čerpadla za pozoruhodnou cenu | Kanalizační šachty | Ocelové konstrukce | Požární bezpečnost | Pračky | Regály a regálové systémy | Solární ohřev vody