C52 Sewer Mole

C52 Sewer Mole

Product enquiries

If you have questions about this product feel free to contact us:

Phone: +420 466 985 890

E-mail: office@phhp.cz


The high-pressure water breaks layers deposited on the sewer or drain pipe wall directing the nozzle in the opposite direction to enable its motion with the hose in the sewer pipe. Pressure water is provided by a hydrant or a pump via a C52 hose.

Nozzle includes:

Nozzle shell duralumin piece
Nozzle insert duralumin piece with a 2´´ thread
Nozzle jet brass piece, full or with a jet

Nozzle flow rate: 460 l/min at pressure 0.4 MPa
Weight: 0.9 kg with a C52 Al coupling
Connection of the nozzle to the hose by a C52 coupling
Minimum diameter of the drain pipe wall, sewer pipe, etc. is 130 mm.
Cat. No. vv 229 

Product enquiries

Your first name and surname: *
Your e-mail address: *
Your enquiry/message: *
 
 
Control code: *

Fields marked as (*) are mandatory.

After clicking on "Send" the message will be sent to our e-mail. You can expect our response within 2 working days. But mostly it will take only a few hours.

EmailSend to e-mail PrintPrint

Our products

Recommended

Are you not sure?

Tel.: +420 466 985 890
+420 466 985 981
+420 466 985 892
Fax: +420 466 985 367
GSM: +420 602 661 103
E-mail: office@phhp.cz

Opening hours:

Monday - Friday       7.00AM - 3.30PM
Site map Optimalizace pro vyhledávače eBRÁNA s.r.o. Tvorba www stránek eBRÁNA s.r.o.

Bezpečnostní agentury | Čerpadla za pozoruhodnou cenu | Kanalizační šachty | Ocelové konstrukce | Požární bezpečnost | Pračky | Regály a regálové systémy | Solární ohřev vody