Portable floating pump PH-Cyklon 2/1500

The device can be used by fire brigades to replenish fire engine tanks with water from outdoor natural water sources. It can also be used to pump out water from flooded areas and rooms and for other applications, e.g. agriculture, building sites, etc.

Sufficient power of the pump allows it to supply water simultaneously to two nozzles of type C and one of type B. (Storz C – Ø 52mm, Storz B – Ø 75mm)

Warning: The pump must not be run in enclosed areas as there is a danger of carbon oxide poisoning!!!

Complete device:

Engine:	HONDA GXV 390	Supporting plate:	Al Si9 Cu3
Pump Casing:	centrifugal type-Al casting	Runner:	Al Si9 Cu3
Float:	Polyethylene/polyurethan	Suction cover:	Al Si9 Cu3

MAIN TECHNICAL SPECIFICATIONS:

Pump	Max. flow rate:	1540 l/min
	Max. delivery head:	55 m
	Max. speed:	3 500 ot./m
	Outlet coupling:	Storz B75
Engine HONDA GXV 390	Max. output:	7,6 kW/3600 rpm
	Cylinder volume:	389 cm3
	Engine weight:	32 kg
	Fuel consumption:	2,9 l/hour
Float	Dimensions:	975x700x205 (mm)
	Float weight:	10,3 kg
Complete device	Standby weight:	54 kg
	Total weight:	56 kg
	Dimensions:	1050x740x490 (mm)

Cat. number

vv 228

The pump and the engine are in one unit, so the pump cannot be used independently. The engine shaft goes thru the pump block without a sealing. The pump block is bolted to the engine thru the supporting plate and the pump cannot be connected to any other engine type.
The bottom side of the block is fitted with a cover to prevent debris and particles over Ø 20mm. The delivery outlet is fitted with a B75 hose coupling.

The float body is made of polyethylene by centrifugal injection as one block. The internal wall has about 20 mm of lightweight polyurethane foam in order to increase resistance to breakthrough which guarantees unsinkability of the device. This design of the float features outstanding stability on the water surface.The frame is used both for carrying and handling the unit and also for fixing a rope to secure it in its position. The design of the pump allows „dry“ run without damage.