- Search term must have more than 2 characters.
Description of the PORTABLE FLOATING PUMP PH-800 BS
|Configuration||engine||Briggs & Stratton 850 Series|
|pump type||centrifugal – aluminium casing|
|float||polyethylene block with handles|
|runner||cast iron casting|
The device can be used by fire brigades to replenish fire engine tanks with water from outdoor natural water sources. It can also be used to pump out water from flooded areas and rooms and for other applications, e.g. agriculture, building sites, etc.
The pump casing of Al alloy is bolted to the engine flange and the float. The bottom side of the casing is fitted with a plastic screen to prevent access of dirt and debris exceeding 20 mm in diameter. The delivery outlet is fitted with a C52 hose coupling.
The float body is made of polyethylene by centrifugal injection as one block. The internal wall is lined by approx. 20 mm thick lightweight rigid polyurethane foam layer in order to increase resistance to breakthrough, which guarantees unsinkability of the device. This design of the float features outstanding stability on the water surface. Integrated in the float, there are two handles used both for carrying and handling the device, and also for fixing a rope to secure it in its position.
Warning: The pump must not be run in enclosed areas as there is a danger of carbon oxide poisoning!!!
|Max. flow||1 080 l/min|
|Total head||18 m|
|Discharge connection||Storz C52 (2”)|
|Engine||Briggs & Stratton 850 Series|
|Engine power||4.1 kW / 5.5 HP|
|Fuel tank capacity||1 l|
|Fuel||unleaded petrol (BA 95)|
|Float dimensions (L x W x H)||730 x 610 x 200 mm|
|Device dimensions (L x W x H)||780 x 610 x 395 mm|
|Dry weight (empty)||24,1 kg|
|Cat. number||vv 223-BS|
The data was measured by the accredited testing laboratory TÚPO No. 1011-2