Upravit stránku
Floating pump PH-Cyklon 1Graf výkonu
The device is designed for fire brigades to replenish fire engine tanks with water from outdoor natural water sources, to pump out water from flooded areas, etc.

Description of the FLOATING PUMP PH-Cyklon 1

ConfigurationengineHonda GCV 190
pump typecentrifugal – aluminium casing
floatpolyethylene block with handles
runnercast iron casting

Application

The device can be used by fire brigades to replenish fire engine tanks with water from outdoor natural water sources. It can also be used to pump out water from flooded areas and rooms and for other applications, e.g. agriculture, building sites, etc.

The pump casing of Al alloy is bolted to the engine flange and the float. The bottom side of the casing is fitted with a plastic screen to prevent access of dirt and debris exceeding 10 mm in diameter. The delivery outlet is fitted with a B75 hose coupling.

The float body is made of polyethylene by centrifugal injection as one block. The internal wall has about 20 mm of lightweight polyurethane foam in order to increase resistance to breakthrough which guarantees unsinkability of the device. This design of the float features outstanding stability on the water surface.The two handles are used both for carrying and handling the unit and also for fixing a rope to secure it in its position. The design of the pump allows „dry“ run without damage.

Max. flow1 120 l/min
Total head38 m
Discharge connectionStorz B75 (2,5”)
EngineHonda 190 GCV
Engine power3.8 kW / 5.1 HP
Fuel tank capacity0.9 l
FuelNatural 95
Float dimensions (L x W x H)730 x 610 x 200 mm
Device dimensions (L x W x H)780 x 610 x 430 mm
Dry weight (empty)25 kg
Cat. numbervv 280

Product enquiries