PH ATOMIC - ATTACK /100

The PH ATOMIC – Water Mist Fire Suppression Lance “Attack” consists of a stainless-steel nozzle body, a spike with 16x1.9mm holes on each side around the perimeter, a ball valve and an inlet part fitted with Storz D25 Brass coupling for a pressure of 40 bar.
The ball valve can be used to close or open the mist nozzle. This PH ATOMIC mist lance is designed for spraying water by direct spray of mist.
     
Always use protective gloves to operate the PH ATOMIC mist lance.

When using the PH ATOMIC mist lance in enclosed spaces, it is sufficient to create a hole in the door, window, roof, etc., and fight the fire with water mist without the need for firefighter entry. This is a step forward in firefighter Health & Safety, preventing also access of air to the fire. With the use 70 l of water per minute, the mist completely evaporates minimising secondary damage to property.
     
The PH ATOMIC mist lance should not be used to create holes in hard materials (brick walls, concrete, stone, wood, etc.). In these materials, it is absolutely necessary to first make a hole of the required diameter (e.g. by drilling or using a hammer) for the subsequent use of the fog spike.
 
Available in three length sizes, 55 cm, 100 cm and 150 cm.