- Search term must have more than 2 characters.
Description of the FLOATING PUMP PH-Cyklon 1
|Configuration||engine||Honda GCV 190|
|pump type||centrifugal – aluminium casing|
|float||polyethylene block with handles|
|runner||cast iron casting|
The device can be used by fire brigades to replenish fire engine tanks with water from outdoor natural water sources. It can also be used to pump out water from flooded areas and rooms and for other applications, e.g. agriculture, building sites, etc.
The pump casing of Al alloy is bolted to the engine flange and the float. The bottom side of the casing is fitted with a plastic screen to prevent access of dirt and debris exceeding 10 mm in diameter. The delivery outlet is fitted with a B75 hose coupling.
The float body is made of polyethylene by centrifugal injection as one block. The internal wall has about 20 mm of lightweight polyurethane foam in order to increase resistance to breakthrough which guarantees unsinkability of the device. This design of the float features outstanding stability on the water surface.The two handles are used both for carrying and handling the unit and also for fixing a rope to secure it in its position. The design of the pump allows „dry“ run without damage.
Warning: The pump must not be run in enclosed areas as there is a danger of carbon oxide poisoning!!!
The data was measured by the accredited testinglaboratory TÚPO No. 1011-2
|Max. flow||1 120 l/min|
|Total head||38 m|
|Discharge connection||Storz B75 (2,5”)|
|Engine||Honda 190 GCV|
|Engine power||3.8 kW / 5.1 HP|
|Fuel tank capacity||0.9 l|
|Float dimensions (L x W x H)||730 x 610 x 200 mm|
|Device dimensions (L x W x H)||780 x 610 x 430 mm|
|Dry weight (empty)||25 kg|
|Cat. number||vv 280|