- Search term must have more than 2 characters.
Description of the PORTABLE FLOATING PUMP PH-Poseidon 1 BS Supra
|Configuration||engine||Briggs & Stratton PXi 1000|
|pump type||centrifugal – aluminium casing|
|float||polyethylene block with handles|
|runner||cast iron casting/ bronze on request|
The pump casing of Al-alloy is bolted to the engine flange and the float. The bottom side of the casing is fitted with a stainless grid to prevent access of dirt and debris exceeding 10 mm in diameter. The delivery outlet of the PH–POSEIDON 1 BS Supra is fitted with a Storz B75 hose coupling.
The float body is made of polyethylene by centrifugal injection as one block. The integrated handles make it easy to handle and carry the pump and can also be used to fix a rope to prevent the pump from floating away.
The engine has two options for starting: manual or electric start. The power bank with the JUMP STARTER function with a total capacity of 10,000mAh will make it much easier to start the pump motor. The starter source can also be used as a backup to charge phones, laptops and other electronic devices. It includes a connection cable between the power bank and the connector of the motor circuit and charging source.
The design of the pump allows dry-running without damage.
- Power bank with JUMP STARTER function with a total capacity of 10,000 mAh
- Connection cable for electrical start
- Charging source
Warning: The pump must not be run in enclosed areas as there is a danger of carbon oxide poisoning!
|Max. flow||1 180 l/min|
|Total head||43 m|
|Discharge connection||Storz B75 (2,5")|
|Engine||Briggs & Stratton PXi 1000|
|Engine power||5,3 kW / 7,2 HP|
|Fuel capacity additional tank||3,8 l|
|Fuel||unleaded petrol (BA 95)|
|Float dimensions (L x W x H)||710 x 610 x 380 mm|
|Device dimensions (L x W x H)||710 x 610 x 410 mm|
|Dry weight (empty)||26,5 kg|